Rejuran, Aqua Injection, and Skin Botox all at once, painlessly?

This is a story about skin texture therapy, a treatment I frequently perform at home.

In summary, it is a skin booster procedure that combines Rejuran, water-glow injections, and skin Botox into a single solution and injects it all at once .

I will explain, in order, why it was made this way, why it doesn't come pre-mixed, and why it hurts less.

0. I wanted to receive everything, but it hurt too much.

I was originally someone who used to get Rejuran, water glow injections, and skin Botox one by one.

It was a procedure that all three of us liked.

But what would happen if we received these separately?

Apply anesthetic cream, inject Rejuran into the entire face, and

And I also injected hyaluronic acid all over my face...

Skin Botox is also injected separately...

It amounts to stabbing the same face three times.

Even I thought it hurt so much.

Still, I wanted to receive everything.

Because the effects are different for each.

So I thought.

If all three are ingredients to be placed in the shallow layer anyway, couldn't they be combined and added all at once?

What was organized in that way is skin texture therapy.

Mix and inject skin boosters with different purposes

1. What is injected at once in Skin Texture Therapy?

Skin texture therapy is a procedure in which four ingredients are combined into a single solution and injected using a dedicated injector .

1. Polynucleotide (PN) - Rejuran and salmon PN ingredients fall into this category. The purpose is to improve the skin's overall regenerative environment.

2. Hyaluronic Acid (HA) - This is the ingredient used in water-glow injections. It attracts moisture from the dermis to reduce dryness.

3. Botulinum Toxin - The toxin is injected shallowly rather than deep into the muscle. It aims to regulate sebum secretion and improve pores.

4. EPISODE Pain Relief Formula - This formula includes local anesthetics such as lidocaine. It is combined to reduce the pain burden from the moment of injection.

Rough skin texture is often accompanied by a lack of moisture, prominent sebum and pores, and poor skin condition.

Therefore, the purpose of this procedure is to address regeneration, hydration, and sebum control with a single anesthetic, a single injection, and a single soothing treatment .

If you have a clear single cause, it is more appropriate to receive that procedure alone.

Skin texture therapy is a procedure chosen when multiple concerns overlap .

2. But why don't they come out mixed from the beginning?

I really liked convenience store bibimbap when I was a student preparing for exams.

But every time that happened, I was curious.

We're going to mix it all together anyway, so why did they put the rice, vegetables, and gochujang in separate bowls?

The same applies to medical devices.

PN, hyaluronic acid, and toxin are separate products that have each received approval.

If you want to mix this in advance to make a single product, you must prove again that it does not deteriorate while distributed and stored in the mixed state .

The process of obtaining approval for mixed products entails just as many problems.

So we don't mix it in advance.

Immediately before the procedure, open the product in front of the patient and mix it according to the specified ratio.

Just like convenience store bibimbap, it is safest to mix it right before eating.

3. We disclose everything, including what and how much is included.

Nowadays, every hospital creates a skin booster program with its own unique recipe.

However, there are cases where exactly which product is included and in what quantity is not specified .

Even within the same category of 'polynucleotide,' there are various types of products.

The same applies even if it is the same 'hyaluronic acid'.

If only the names of the ingredients are listed, it is difficult for the patient to know what is actually included.

Therefore, we disclose the product names and capacities for each lineup .

1. Hytox Skin Texture Therapy - Salmon PN 2cc + Hytox 20U + Hyaluronic Acid 2.5cc

2. Coretox Skin Texture Therapy - Rejuran 2cc + Coretox 20U + Hyaluronic Acid 2.5cc

3. Xeomin Skin Texture Therapy - Rejuran 2cc + Xeomin 20U + Hyaluronic Acid 2.5cc

4. Dysport Skin Texture Therapy - Rejuran 2cc + Dysport 20U + Hyaluronic Acid 2.5cc

5. Allergan Skin Texture Therapy - Rejuran 4cc + Allergan 20U + Belotero Revive 2cc

EPISODE pain relief formulation, X-Injector injection, and modeling pack are included in all lineups equally.

We will show you the full product before the procedure, including the opening and mixing process exactly as it is.

The product names and dosages used are recorded exactly as they are in the procedure report, so you can verify them again even after the procedure.

Post-procedure records only viewable in EPISODE, My EPISODE

4. I have tried all the injectors on the market.

I have tried every skin booster injector on the market .

DermaShine, Hi-Cooks, Rejumate, etc.

It was good that it hurt less.

However, there was a common problem for everyone.

Loss occurs as the drug accumulates on the injector tip or leaks toward the negative pressure nozzle .

It was such a waste that expensive ingredients like Rejuran couldn't penetrate the skin and just vanished like that.

Then, the new X-Injector came out, so I tried the demo, and it was different.

The pain has decreased significantly, and the amount of loss has also decreased noticeably.

I signed the contract right there on the spot.

The X-Injector is a device that automatically injects a fixed amount consistently while cooling the injection site with its own cooling system.

It is essentially a combination of cooling and precision injection functions.

We use 32G 0.8-1.2mm and 34G 0.8mm multi-needles, and they are disposable sterile injection needles that are newly opened for each procedure.

Even now, when I get it done myself, I only use X-injectors.

X-Injector that injects drugs into the dermis with a 9-needle

5. Pain is not reduced by a single factor.

The biggest reason people hesitate to use skin boosters is the pain.

However, more factors than you might think are involved in injection pain.

1. pH of the drug

2. Physical properties (viscosity) of the drug

3. The temperature of the drug

4. Injection method and speed

5. Whether anesthetic components (lidocaine, etc.) are included

We examined each of these factors one by one and structured the plan to reduce pain by dividing it into pre-, during, and post-procedure stages .

1. Before the procedure - Sufficiently anesthetize the skin surface with a lidocaine and prilocaine combination anesthetic cream.

2. During the procedure (Medication) - By including an EPISODE pain-relieving blend in the mixture, it reduces the pain burden from the moment of injection.

3. During the procedure (Equipment) - The procedure is performed while cooling the injection site using the X-Injector's cooling function.

4. After the procedure - Once the injection is finished, immediately apply a modeling pack to soothe any remaining heat and irritation.

So the pain level is 2/5, just a stinging sensation .

It is not a procedure where pain is zero.

However, it is definitely more convenient than receiving the three treatments separately. I am speaking from personal experience.

6. Frequently Asked Questions

Q1. How long does the skin texture therapy take?

It takes about 30 to 40 minutes , including the anesthesia time.

Q2. How long does the effect last?

Although it varies from person to person, it takes about 3 to 6 months . If you feel your skin lacks moisture or condition, it is recommended to get separate water-glow injections or Rejuran treatments in between.

Q3. What is the recovery period?

Swelling subsides within 1-2 days . If bruising occurs, it will heal within a week.

Q4. Can I use the neck as well as the face?

The entire face is the standard, and the entire neck is also possible.

Q5. Who is this good for?

We recommend this to those whose pores are becoming increasingly prominent, those whose makeup looks uneven and whose skin texture feels rough, those whose skin becomes oily by the afternoon, and those who want to see the effects of multiple treatments at once.

Q6. Are there cases where it should not be received?

Please be sure to inform us during your appointment if you have a history of hypersensitivity to hyaluronic acid, botulinum toxin, or lidocaine; if you have a neuromuscular disorder; if you are pregnant or breastfeeding; or if there is inflammation or infection at the injection site!

7. In conclusion..

Skin texture therapy

To summarize, it is as follows.

I can't receive them separately because it hurts, but I still wanted to receive them all, so I gathered them all at once.

We cannot mix and sell it in advance, so we mix it right in front of you.

We do not hide what goes into what and how much; we show you everything.

I tried everything until I found an injector with less loss and less pain.

Skin texture therapy is not a necessary procedure for everyone.

I will assess your skin condition first and recommend it only to those who need it.

This has been Seo Min-ho. Thank you for reading.