GLX Lifting
GLX Lifting
Laser-based device lifting
GLX Lifting
GLX Lifting
GLX Lifting uses the GentleMax® Pro Plus's GLX Delivery System and DCD Cooling 1064nm laser treatmentIt delivers heat to the skin and induces collagen regeneration while protecting the skin surface with cooling.
The difference from existing high-frequency-based heat transfer methods is that the tip does not touch the skin. non-contact methodThe key feature is that heating and cooling are performed simultaneously using an in-laser.
The treatment uses different irradiation methods depending on the depth. Two stepsThe process proceeds as follows. First, it smooths the sagging and contours of the lower face, and then delivers heat to the entire face and neck to improve skin texture and elasticity.
Why GLX Lifting
If you haven't seen results with other lifting procedures
You can try changing the method of applying heat.
GLX Lifting uses the same 1064nm laser
It delivers different heat to each of the two layers.
Point 01
The 1064nm wavelength is
It reaches deep into the skin.
1064nm is a wavelength that is not easily absorbed by skin pigments or moisture. It uses less energy on the surface of the skin and penetrates into the dermis and below. Therefore, it can generate heat from the inside while leaving the outer layer undamaged.
- 1064nm Nd:YAG — Wavelength that penetrates deeper due to less absorption at the surface
- GLX-2 Surface Heating — Upper to lower dermis, 0.1-1.5mm
- GLX-1 Core Heating — Subdermis to fat layer, 1.5-3.0mm
Point 02
From deep layers to shallow layers,
We will proceed in two steps.
Even the same 1064nm laser varies depending on the irradiation time and spot size The way the heat enters changes. GLX Lifting adjusts this setting to treatment the deep layers first, and then The treatment is performed by continuing the shallow layers.
-
GLX-1
Deep layer, push in
The step of applying heat to the lower dermis and fat layer by overlapping each spot one by one.
-
GLX-2
Shallow layer, send up
A step that passes quickly at short intervals to evenly fill the upper and lower dermis.
Point 03
While cooling the surface
It retains heat only on the inside.
It cools the skin surface as the laser passes by. It lowers the temperature of the epidermis and leaves the heat of the dermis unchanged. Therefore, the outside is less burdensome, and heat can be collected on the inside. Since anesthesia is not used, the energy is adjusted based on the heat sensation felt during the treatment .
- non-contact method where the tip does not touch the skin
- Lowering epidermal temperature by using laser and cooling together
- Energy regulation for each area based on thermal response
GLX 2 Step
Even with the same wavelength
The work performed varies depending on the depth.
GLX Lifting has different depths of heat generation and directions of spreading.
Proceed with the two steps in order.
Deep layer, stamping technique
GLX-1 Core Heating
Core Heating
- Subdermis and fat layerThe step of pushing heat up to
- Taking photos of each spot overlapping with a wide spot
- Refine the heavy-looking lower face and neckline
- I feel a warm sensation
Shallow layer, painting technique
GLX-2 surface heating
Superficial Heating
- Upper and lower dermisStep of evenly raising and distributing heat
- Passing by quickly overlapping as small spots
- Refines skin texture, fine lines, and overall elasticity
- A warm, spreading sensation of heat continues.
How It Works
GLX Lifting Mechanism of Action
A 1064nm laser passes over the surface
Reach the dermis and below.
The surface is protected by cooling and
Heat gathers on the inside
Collagen contracts and
It was newly created over the next few weeks.
Treatment Areas
GLX Lifting treatment Areas
The treatment area is both cheeks and the neck.
The depth and amount of heat delivered vary depending on the area.
We do not treatment on the area under the cheekbone where hollowing has occurred.
Applying strong heat to this area can make the cheeks appear sunken, potentially resulting in a peanut-shaped face.
If you wish to adjust the overall volume of your face, we will re-determine the scope during the consultation.
Recommended For
I recommend this to people like this.
The lower face and neckline
Someone who looks heavy
Sagging and volume
Someone who is also concerned
Needle treatment and anesthesia
For those who feel burdened
Without a recovery period
For those who want to maintain their daily routine
Doctor's Column
Treatment Stories written personally by the Director
This is a text written directly by the Director who actually performs this treatment , detailing the principles and standards.
The Episode Difference
Why It's Different
Every process has its own reason for the EPISODE.
01
Starting with the cause of sagging
I will check.
There is a difference between skin that looks sagging due to looseness and skin that looks heavy due to fat.
During the consultation, the proportion of GLX-1 and GLX-2 is first determined based on skin thickness, amount of fat, and the degree of cheek hollowing.
02
In the EPISODE Lifting Design Guide
We will proceed accordingly.
Dividing the mid and lower facial areas into 11 zones, the areas prone to sinking and sagging Perform the treatment while referring to the indicated EPISODE lifting design guide. The red boxes are the sinking areas, and the blue boxes are the sagging areas.
- 01 Under the eyes
- 02 Eye area
- 03 nasolabial folds
- 04 front cheekbone
- 05 Side cheekbones
- 06 Front ball
- 07 Side ball
- 08 deep cheek
- 09 Jawline
- 10 front double chin
- 11 Side double chin
03
Without anesthesia
We will proceed while observing the response.
GLX Lifting does not require anesthesia before the treatment . The degree to which one feels heat varies from person to person, and The sensation of heat just before it gets hot is also a sign that energy is being transferred well. EPISODE adjusts energy for each area while monitoring the response during the treatment .
CONTROL04
If you keep a record
The changes are more visible.
The attending physician's comments on the treatment that day, treatment details, and remaining sessions I will leave you an online report of the treatment records to date You can check it at a glance.
RECORDSCare Process
GLX Lifting proceeds through this process.
01
Cleansing
02
Check the treatment site
03
treatment
04
Soothing ampoule pack provided
05
homecoming
06
Provision of treatment report
Some processes will be changed for the promotional treatment.
Notice
Instructions for treatment
-
1
GLX Lifting does not use anesthetic cream or injections prior to the treatment . This is to allow for energy adjustment based on the heat sensation felt during the treatment . If you feel any discomfort, please do not endure it and let us know.
-
2
Please inform us before the treatment if you have recently tanned, been exposed to UV rays for a long time, or if your skin has become sensitive. We will adjust the timing of the treatment .
-
3
We do not treatment on the area under the cheekbones where hollowing has occurred. If you wish to restore overall facial volume, we will re-determine the scope during the consultation.
-
4
You may experience facial redness and a slight warmth immediately after the treatment , but these usually subside within a few hours. You can wash your face and apply basic makeup on the same day.
-
5
Please avoid saunas, steam rooms, hot baths, alcohol, and strenuous exercise on the day of the treatment . Redness and swelling may persist for a long time.
-
6
Your skin may become dry for a few days after the treatment . Please pay attention to moisturizing and sun protection.
-
7
Since it takes time for new collagen to be produced, changes become apparent over time after the treatment . Typically, the initial treatment is repeated three times at one-month intervals, but the timing and extent of changes vary from person to person.