O2toDerm
O2derm

Oxygen, negative ion skincare
O2derm
O2toDerm
O2derm filters nitrogen from the air High concentration oxygenThis is skincare. There are two devices that send oxygen to the face.
O2GunIt is a sprayer that carries an ampoule in oxygen and sprays it as a mist. Ion DomeIt is a dome-shaped mask worn over the face, which emits oxygen and negative ions from the inside and lights up an LED.
It is used on dry and dull skin, or on skin that has become sensitive after laser or Skin Booster treatment.
Oxygen and Anion
Oxygen filtered from the air
It is sent to two devices.
After removing sebum with a whipping mask,
Spray with an O2 gun and cover with an ion dome.
Point 01
Nitrogen sticks to the filter and
Only oxygen comes out.
The main unit draws in indoor air and passes it through an adsorption filter. Using the PSA method, which repeatedly applies and releases pressure, it does not require a separate oxygen tank.
- Oxygen
oxygen
Concentration about 90%
- Anion
negative ions
Approximately 3 million occurred
- PSA
Adsorption filter
Captures nitrogen from the air
Point 02
With a whipping mask
Removes sebum and impurities.
The Oxygen Bomb Whipping Mask is a thick, creamy foam mask. When you place it on your face and wipe it off, sebum and impurities around the pores are carried away by the foam.
- Foaming cleansing mask
- Removes sebum and impurities around pores
- Spray the ampoule immediately after wiping.
Point 03
with O2gun
Spray the oxygen vitality ampoule.
Oxygen inside the O2 gun breaks down the ampoule into small particles and releases them as a mist. The nozzle passes over the entire face while keeping it suspended above the skin.
- Ampoule
Oxygen Vitality Ampoule
Organic rose water, containing 4GF
- Mist
mist spray
Finely broken down by carrying oxygen
- Nozzle
non-contact
Do not place nozzle against skin
Point 04
The ion dome is
Float it over the face and place it on.
The dome does not adhere to the skin, so it does not press against your face. Oxygen and negative ions continuously flow into the dome, and the LEDs on the edges light up. You simply need to lie down with your eyes closed during the treatment.
- Oxygen
oxygen
Send from main body to dome
- Anion
negative ions
Many particles in the air near forests or waterfalls
- LED
LED
Four colors: red, yellow, green, and blue
LED Spectrum
Ion dome LEDs
I use four colors.
The longer the wavelength, the deeper it penetrates the skin.
The color is determined based on the condition of the skin that day.
- 640nm
Red
Up to the deep dermis
- 590nm
Yellow
Up to the middle of the dermis
- 490nm
green
Up to the upper part of the dermis
- 470nm
Blue
near the epidermis
O2toDerm Line
O2derm exclusive product
I write three things
This is a product from Trisys, the manufacturer of the equipment.
Step 1
Oxygen bomb whipping mask
Oxygen Bomb Whipping Mask
It is a cleansing mask that lathers up and then wipes off. It removes sebum and impurities around the pores.
Step 2
Oxygen Vitality Ampoule
Oxygen Vitality Ampoule
This is an ampoule containing organic rose water and 4GF. It is sprayed using an O2 gun rather than applied topically.
Step 3
Oxygen Moisture Energy Cream
Oxygen Energy Cream
It is a moisturizing cream applied at the end of the skincare routine.
How It Works
O2derm Mechanism of Action
With whipped mask foam
Removal of sebum and impurities
Oxygen and ampoules with the O2 gun
Spray as a mist
Inside the ion dome
Filled with oxygen and negative ions
The Episode Difference
Care Process
O2Derm proceeds through this process.

01
Cleansing

02
whipping mask

03
Oxygen Vitality Ampoule + O2 Gun

04
Ion Dome

05
Modeling pack

06
Finish with energy cream

07
homecoming

08
Provision of treatment report
Some processes will be changed for the promotional treatment.
Notice
Post- treatment precautions
- 1
You can wash your face and apply makeup starting from the day of the treatment.
- 2
Do not rub your face vigorously or use scrubs or exfoliants on the day of treatment.
- 3
If there is a sensation of heat or redness, please apply a gentle cold compress. Do not apply ice directly to the skin.
- 4
Please avoid high-temperature environments such as saunas, steam rooms, and hot baths for 2-3 days.
- 5
If you are taking medication that makes you sensitive to light, please let us know before treatment.
- 6
If itching, stinging, or redness persists for more than a day, please contact us immediately and visit the clinic.
Price












